Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7416
The Verti-Drain 7416 incorporates the technology of the second-generation
Verti-Drain line with new and improved features which include a new angle adjustment up to 25 degrees. The 7416 has a working width of 64" (1.6m)
and is lighter weight than the 7516, thus can be used with smaller tractors.
Download brochure
click on the table name for more information
Model |
Working width |
64” (1.60 m) |
Working depth |
Up to 14” (350 mm) |
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄2” (65 mm)
Spacing 5” (130 mm)
Spacing 7 1⁄2” (195mm)
|
Up to 0.55 mph (0.85 km/h)
Up to 1.10 mph (1.75 km/h) Up to 1.60 mph (2.60 km/h)
|
PTO speed: (max) |
Up to 500 rpm |
Weight |
1,914 lbs (870 Kg) |
Hole spacing side-to-side |
5” (130 mm) @ 3⁄4” (18 mm) holes
2.5” (65 mm)@ 1⁄2” (12 mm) holes
|
Hole spacing in driving direction |
1” - 7 1⁄2” (25 mm 195 mm) |
Recommended tractor size |
35 HP with lift capacity of minimum 2,310 lbs (1,050 Kg)
|
Capacity (maximum)
Spacing 2 1/2” (65 mm)
Spacing 5” (130 mm)
Spacing 7 1/2” (195mm)
|
-
Up to 14,921 sq ft (1,387 sq m)/ hour Up to 29,841 sq ft (2,773 sq m)/ hour
Up to 44,762 sq ft (4,160 sq m)/ hour
|
Shipping dimensions |
68” x 32” x 48” (1.7m x 0.8 m x 1.2 m)
|
Maximum tine size |
Solid 3⁄4” x 12” (18 mm x 300 mm) Hollow 1” x 10” (25 mm x 250 mm)
|
Slip clutch setting PTO |
Maximum 4,400 lb inch (500 Nm)
|
Three point linkage |
3- point CAT 1 |
Transmission oil |
Life time grease EP 00 |
Lubrication grease |
EP 2 |
Standard items |
Set solid tines to 1⁄2" x 12” (12mm x 300mm)
Front and rear roller
3- shuttle gearbox
|
|
|
FEATURE |
BENEFIT |
Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
|
3-speed gearbox |
Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential |
Sealed bearings not bushings |
Long maintenance free life |
Simple tine design |
Easy to change and cheap to replace |
1⁄2” (12 mm) or 1” (25 mm)
solid & hollow tines |
Choice of tines for varying conditions |
click on the table name for more information
Model |
Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
Solid Tines |
311.112.200
|
1/2 x 8 #
|
8 |
10 |
na |
12mm |
na |
na |
12mm |
30 |
311.118.200 |
3/4 8 |
8 |
10 |
na |
18mm |
na |
na |
18mm |
20 |
9990019 |
1/2 x 14 |
14 |
15-1/2 |
na |
12mm |
na |
na |
12mm |
24 |
2381837 |
1/2 x 10 # |
10 |
12-1/2 |
na |
12mm |
na |
na |
12mm |
24 |
2381841 |
3/4 x 10 |
10 |
12-3/4 |
na |
18mm |
na |
na |
18mm |
12B |
2381838 |
1/2 x 12 # |
12 |
14 |
na |
12mm |
na |
na |
12mm |
24 |
2382638 |
3/4 x 12 |
12 |
14 |
na |
18mm |
na |
na |
18mm |
12B |
311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
24 |
311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
24M/48* |
311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
24N |
9990056 |
5/16 x 7 |
7 |
9 |
na |
8mm |
na |
na |
8mm |
24M/48* |
9990059 |
5/16 x 10 |
10 |
11-1/2 |
na |
8mm |
na |
na |
8mm |
24M/48* |
311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
48* |
Coring Tines |
311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
24M/48* |
311.210.125 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
24M/48* |
9990022 |
5/8 x 7 |
7 |
8 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
9990023 |
3/4 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12B |
9990024 |
1 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12B |
9990034 |
1-1/4 x 12 |
12 |
14-1/2 |
7/8 |
1-1/4 |
.156 |
3/4 |
24mm |
12 |
9990040 |
3/4 x 10 |
10 |
11-1/2 |
9/16 |
3/4 |
.094 |
7/16 |
12mm |
24 |
9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
24 |
999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
24 |
999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
999F007 |
5/8 x 6 fixed shank |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
Adapters |
314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
na |
24 |
314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
na |
24 |
2451800 |
B-3/4 to 1 # |
na |
na |
18mm |
24mm |
na |
na |
na |
12 |
311.812.120 |
X-1/2 Verti-Drill |
na |
na |
1/2 |
na |
na |
na |
12mm |
24 |
311.819.120 |
Y-3/4 Verti-Drill |
na |
na |
3/4 |
na |
na |
na |
18mm |
12 |
Verti-Drills |
311.812.230 |
1/2 x 10 Drill |
10 |
10.5 |
na |
1/2 |
na |
na |
12mm |
24X |
311.819.230 |
3/4 x 10 Drill |
10 |
10.5 |
na |
3/4 |
na |
na |
18mm |
12Y&B |
|
|
|
|
|
|
|
|
|
|
Part # |
Description |
Notes |
Qty. |
211.741.002 |
Turf Hold Down Kit
|
Aligns with 12mm tineholder holes |
1 |
211.741.004 |
Turf Hold Down Kit |
Aligns with 2mm & 4mm tineholder holes |
1 |
211.751.010 |
Pencil Tine Block Kit |
Holds eight shank tines per head |
1 kit |
9200080
|
Core Collector
|
Pulls core to end of pass |
1 |
211.731.010 |
Windrow Kit |
Funnels cores into a straight line behind machine |
1 |
314.425.186 |
Quad Tine Block |
Holds eight 3/8" shank tines |
6 |
314.425.184 |
Dimple Tine Block |
Holds eight 12mm dimple tines or eight 12mm shank quad or cross tines |
6 |
|
|
|