|
Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7316
The Verti-Drain 7316 is a very effective machine for use on all areas of your golf course. The 64" working width makes this model an ideal size for working on greens and tees. When using faster tractor speeds, it will aerate up to 44,760 sq ft/hr on your fairways.
The 7316 has a three-speed gearbox, which will match up to virtually
any tractor.
Download brochure
click on the table name for more information
| Model |
| Working width |
64” (1.60 m) |
| Working depth |
Up to 12” (300 mm) |
|
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄2 ” (65 mm)
Spacing 4” (100mm)
Spacing 6 1⁄2 ” (165mm)
|
Up to 0.55 mph (0.85 km/h)
Up to 1.10 mph (1.75 km/h)
Up to 1.60 mph (2.60 km/h)
|
| PTO speed: (max) |
Up to 500 rpm |
| Weight |
1,480 lbs (670 Kg) |
| Hole spacing side-to-side |
5” (130 mm) @ 3⁄4” (18 mm) holes
2 1⁄2” (130 mm) @ 1⁄2” (12 mm) holes
|
| Hole spacing in driving direction |
1” - 7 1⁄2” (25 mm – 195 mm) |
| Recommended tractor size |
28 HP with lift capacity of minimum 1,815 lbs (825 Kg)
|
|
Capacity (maximum)
Spacing 2 1/2” (65 mm)
Spacing 4” (100mm)
Spacing 6 1/2” (165mm)
|
-
Up to 14,921 sq ft (1,387 sq m)/ hour
Up to 29,841 sq ft (2,773 sq m)/ hour
Up to 44,762 sq ft (4,160 sq m)/ hour
|
| Shipping dimensions |
68” x 32” x 48” (1,700 mm x 800 mm x 1200 mm)
|
| Maximum tine size |
Solid 3⁄4” x 12” (18 x 300 mm)
Hollow 1” x 10” (25 x 250 mm)
|
| Slip clutch setting PTO |
Maximum 4,400 lb inch (500 Nm) |
| Three point linkage |
3- point CAT 1 |
| Transmission oil |
Life time grease EP 00 |
| Lubrication grease |
EP 2 |
| Standard items |
Set solid tines to 1⁄2” x 10” (12mm x 300mm)
Front and rear roller
3- shuttle gearbox
|
|
|
| FEATURE |
BENEFIT |
| Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
|
| 3-speed gearbox |
Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential |
| Sealed bearings not bushings |
Long maintenance free life |
|
Higher working speed
|
Greater working capacity
|
| Useable playing surface |
Aerate at any time without interruption to play |
| Simple tine design |
Easy to change and cheap to replace |
1⁄2" (12 mm) or 3⁄4" (18 mm)
solid & hollow tines |
Choice of tines for varying conditions |
click on the table name for more information
| Model |
| Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
| Solid Tines |
|
311.112.200
|
1/2 x 8 #
|
8 |
10 |
na |
12mm |
na |
na |
12mm |
30 |
| 311.118.200 |
3/4 8 |
8 |
10 |
na |
18mm |
na |
na |
18mm |
20 |
| 2381837 |
1/2 x 10 # |
10 |
12-1/2 |
na |
12mm |
na |
na |
12mm |
24 |
| 2381841 |
3/4 x 10 |
10 |
12-3/4 |
na |
18mm |
na |
na |
18mm |
12 |
| 2381838 |
1/2 x 12 # |
12 |
14 |
na |
12mm |
na |
na |
12mm |
24 |
| 2382638 |
3/4 x 12 |
12 |
14 |
na |
18mm |
na |
na |
18mm |
12 |
| 311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
24 |
| 311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
24N |
| 9990056 |
5/16 x 7 |
7 |
9 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 9990059 |
5/16 x 10 |
10 |
11-1/2 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
48* |
| Coring Tines |
| 311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
24M/48* |
| 311.210.125 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
24M/48* |
| 9990022 |
5/8 x 7 |
7 |
8 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| 9990023 |
3/4 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12 |
| 9990024 |
1 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12 |
| 9990040 |
3/4 x 10 |
10 |
11-1/2 |
9/16 |
3/4 |
.094 |
7/16 |
12mm |
24 |
| 9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
24 |
| 999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
24 |
| 999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| 999F007 |
5/8 x 6 fixed shank |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| Adapters |
| 314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
12mm |
24 |
| 314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
12mm |
24 |
| 311.812.120 |
X-1/2 Verti-Drill |
na |
na |
1/2 |
na |
na |
na |
12mm |
24 |
| 311.819.120 |
Y-3/4 Verti-Drill |
na |
na |
3/4 |
na |
na |
na |
18mm |
12 |
| Verti-Drills |
| 311.812.230 |
1/2 x 10 Drill |
10 |
10.5 |
na |
1/2 |
na |
na |
1/2" |
24X |
| 311.819.230 |
3/4 x 10 Drill |
10 |
10.5 |
na |
3/4 |
na |
na |
3/4" |
12Y |
|
|
|
|
|
|
|
|
|
|
| Part # |
Description |
Notes |
Qty. |
| 211.731.006 |
Turf Hold Down Kit
|
Aligns with 12mm tineholder holes |
1 |
| 211.731.008 |
Turf Hold Down Kit |
Aligns with 18mm tineholder holes |
1 |
| 9200080 |
Core Collector |
Pulls cores to end of pass |
1 |
|
211.731.010
|
Windrow Kit
|
Funnels cores into a straight line behind machine |
1 |
| 314.425.240 |
Needle Tine Block |
Holds twenty-four 5mm tines |
6 |
| 9990208 |
Pencil Tine Block |
Holds eight 8mm shank tines |
6 |
| 314.425.178 |
Quad Tine Block |
Holds eight 3/8 shank tines |
6 |
|
314.425.176
|
Dimple Tine Block
|
Holds six 12mm dimples tines or six 12mm shank quad or cross tines |
6 |
| 211.731.002 |
Hydraulic Rear Brush |
Rotating bristle brush to incorporate topdressing into holes |
1 |
|
|
|
