Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7212
This Verti-Drain incorporates all of the innovative technology of the second generation Verti-Drain line, making it the choice of championship courses throughout the world. The 7212 has a three-speed gearbox, which will match
up to virtually any tractor.
The popular Verti-Drain 7212 is ideal for use on greens and most sports turf surfaces where limited access or horsepower is available.
Download brochure
click on the table name for more information
Model |
Working width |
48” (1.20 m) |
Working depth |
Up to 10” (250 mm)
|
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄2” (65 mm)
Spacing 4” (100mm)
Spacing 6 1⁄2” (165mm)
|
Up to 0.60 mph (1.00 kmh)
Up to 1.00 mph (1.50 kmh)
Up to 1.60 mph (2.50 kmh))
|
PTO speed: (max) |
Up to 500 rpm |
Weight |
1,030 lbs (470 Kg) |
Hole spacing side-to-side |
4” (100 mm) @ 3⁄4” (18 mm) holes
2 1⁄2” (65 mm) @ 1⁄2” (12 mm) holes
|
Hole spacing in driving direction |
1” - 6 1⁄2” (25 165 mm) |
Recommended tractor size |
18 HP with lift capacity of minimum 1,250 lbs (570 Kg)
|
Capacity (maximum)
Spacing 2 1/2” (65 mm)
Spacing 4” (100mm)
Spacing 6 1/2” (165mm)
|
-
Up to 12,933 sq ft (1,202 sq m)/hour
Up to 19,897 sq ft (1,849 sq m)/hour
Up to 32,829 sq ft (3,051 sq m)/hour
|
Shipping dimensions |
54” x 32” x 44” (1.35m x 0.8m x 1.1m)
|
Maximum tine size |
Solid 3⁄4” x 10” (18 x 250 mm)
Hollow 1” x 10” (25 x 250 mm)
|
Three point linkage |
3- point CAT 1 |
Transmission oil |
Life time grease EP 00 |
Lubrication grease |
EP 2 |
Standard items |
Set solid tines to 1⁄2” x 10” (12mm x 250mm)
Front and rear roller
3- shuttle gearbox
|
|
|
FEATURE |
BENEFIT |
Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
|
3-speed gearbox |
Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential |
Sealed bearings not bushings |
Long maintenance free life |
Higher working speed
|
Greater working capacity
|
Useable playing surface |
Aerate at any time without interruption to play |
Simple tine design |
Easy to change and cheap to replace |
10” (250 mm) penetration |
Relief of compaction, removing any hard pan of at depth up to 10” (250 mm) |
1⁄2” (12 mm) or 3⁄4” (18 mm)
solid & hollow tines |
Choice of tines for varying conditions |
2 1⁄2" (65 mm) spacing between
1⁄2" (12 mm) tines |
High density of aeration |
click on the table name for more information
Model |
Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
Solid Tines |
311.112.200
|
1/2 x 8 #
|
8 |
10 |
na |
12mm |
na |
na |
12mm |
30 |
311.118.200 |
3/4 8 |
8 |
10 |
na |
18mm |
na |
na |
18mm |
20 |
2381837 |
1/2 x 10 # |
10 |
12-1/2 |
na |
12mm |
na |
na |
12mm |
18 |
2381841 |
3/4 x 10 |
10 |
12-3/4 |
na |
18mm |
na |
na |
18mm |
12 |
311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
18 |
311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
18M/36* |
311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
18N/126* |
9990056 |
5/16 x 7 |
7 |
9 |
na |
8mm |
na |
na |
8mm |
18M/36* |
9990059 |
5/16 x 10 |
10 |
11-1/2 |
na |
8mm |
na |
na |
8mm |
18M/36* |
311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
36* |
Coring Tines |
311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
18M/36* |
311.210.127 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
18M/36* |
9990022 |
5/8 x 7 |
7 |
8 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
18 |
9990023 |
3/4 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12 |
9990024 |
1 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12 |
9990040 |
3/4 x 10 |
10 |
11-1/2 |
9/16 |
3/4 |
.094 |
7/16 |
12mm |
18 |
9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
18 |
999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
18 |
999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
18 |
999F007 |
5/8 x 6 fixed shank |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
18 |
311.219.200 |
3/4 x 8 |
8 |
9-3/4 |
9/16 |
3/4 |
.093 |
7/16 |
18mm |
12 |
311.219.201 |
3/4 x 8 |
8 |
9-3/4 |
9/16 |
3/4 |
.093 |
7/16 |
12mm |
18 |
311.225.200 |
1 x 8 |
8 |
9-3/4 |
3/4 |
1.0 |
.125 |
5/8 |
18mm |
12 |
Adapters |
314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
12mm |
18 |
314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
12mm |
18 |
311.812.120 |
X-1/2 Verti-Drill |
na |
na |
1/2 |
na |
na |
na |
12mm |
18 |
Verti-Drills |
311.812.230 |
1/2 x 10 Drill |
10 |
10.5 |
na |
1/2 |
na |
na |
1/2" |
18x |
|
|
|
|
|
|
|
|
|
|
Part # |
Description |
Notes |
Qty. |
211.721.014 |
Turf Hold Down Kit
|
Aligns with 12mm tineholder holes |
1 |
211.721.012 |
Turf Hold Down Kit |
Aligns with 18mm tineholder holes |
1 |
9100080 |
Core Collector |
Pulls cores to end of pass |
1 |
211.721.016
|
Windrow Kit
|
Funnels cores into a straight line behind machine |
1 |
314.425.170 |
Needle Tine Block |
Holds twenty-one 5mm tines |
6 |
9990206 |
Pencil Tine Block |
Holds six 8mm shank tines |
6 |
314.425.172
|
Dimple Tine Block
|
Holds six 12mm dimples tines or six 12mm shank quad or cross tines |
6 |
|
|
|