|
Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7516
This 5' wide Verti-Drain is the smallest machine which can achieve a full 16" penetration and heave using 1" diameter tines. This universal Verti-Drain can easily be fitted with a variety of solid, hollow or needle tines for use on all areas of turf.
For customers wishing to transport their 75 Series Verti-Drain on highways, a retro-fit bogie wheel system is available.
Download brochure
click on the table name for more information
| Model |
| Working width |
64” (1.60 m) |
| Working depth |
Up to 16” (400 mm) |
|
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄2 “ (65 mm)
Spacing 5” (130 mm)
Spacing 7 1⁄2 “ (195 mm)
|
Up to 0.45 mph (0.70 km/h)
Up to 0.90 mph (1.40 km/h)
Up to 1.35 mph (2.10 km/h)
|
| PTO speed: (max) |
Up to 500 rpm |
| Weight |
2,490 lbs (1,130 Kg) |
| Hole spacing side-to-side |
5” (129 mm) @ 1” (24 mm) holes
2 1⁄2” (65 mm) @ 1⁄2” (12 mm) holes
|
| Hole spacing in driving direction |
2” - 71⁄2” (50 mm – 195 mm) |
| Recommended tractor size |
7516-45HP with lift capacity of min 3,000 lbs(1,350Kg)
7516H - 35 HP
|
|
Capacity (maximum)
Spacing 2 1/2 “ (65 mm)
Spacing 5” (130 mm)
Spacing 7 1/2 “ (195 mm)
|
Up to 12,589 sq ft (1,170 sq m) / hour
Up to 25,178 sq ft (2,340 sq m) / hour
Up to 37,768 sq ft (3,510 sq m) / hour
|
| Shipping dimensions |
71” x 40” x 60” (1.8 m x 1.0 m x 1.5 m)
|
| Maximum tine size |
Solid 1” x 16” (25 mm x 400 mm)
Hollow 1 1⁄4” x 12” (32mm x 300 mm)
|
| Slip clutch setting PTO |
Maximum 7,080 lb inch (800 Nm) |
| Three point linkage |
3- point CAT 1 |
| Transmission oil |
Life time grease EP 00 |
| Lubrication grease |
EP 2 |
| Standard items |
Set solid tines to 3⁄4”x 12”(18mmx300mm) with adapters
Front and rear roller
3- shuttle gearbox
|
|
|
| FEATURE |
BENEFIT |
| Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
|
| 3-speed gearbox |
Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential |
| Sealed bearings not bushings |
Long maintenance free life |
| Simple tine design |
Easy to change and cheap to replace |
| Leaves playing surface useable |
Aeration can be carried out at any time without interruption to play |
click on the table name for more information
| Model |
| Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
| Solid Tines |
|
311.112.200
|
1/2 x 8 #
|
8 |
10 |
na |
12mm |
na |
na |
12mm |
30 |
| 311.118.200 |
3/4 8 |
8 |
10 |
na |
18mm |
na |
na |
18mm |
20 |
| 9990019 |
1/2 x 14 |
14 |
15-1/2 |
na |
12mm |
na |
na |
12mm |
24 |
| 2381837 |
1/2 x 10 # |
10 |
12-1/2 |
na |
12mm |
na |
na |
12mm |
24 |
| 2381841 |
3/4 x 10 |
10 |
12-3/4 |
na |
18mm |
na |
na |
18mm |
12B |
| 2381838 |
1/2 x 12 |
12 |
14 |
na |
12mm |
na |
na |
12mm |
24 |
| 2382638 |
3/4 x 12 # |
12 |
14 |
na |
18mm |
na |
na |
18mm |
12B |
| 2382639 |
3/4 x 16 |
16 |
18 |
na |
18mm |
na |
na |
18mm |
12B |
| 2382640 |
1 x 16 |
16 |
18 |
na |
24mm |
na |
na |
24mm |
12 |
| 311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
24 |
| 311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
24N |
| 9990056 |
5/16 x 7 |
7 |
9 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 9990059 |
5/16 x 10 |
10 |
11-1/2 |
na |
8mm |
na |
na |
8mm |
24M/48* |
| 311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
48* |
| Coring Tines |
| 311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
24M/48* |
| 311.210.125 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
24M/48* |
| 9990022 |
5/8 x 7 |
7 |
8 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| 9990023 |
3/4 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12B |
| 9990024 |
1 x 10 |
10 |
11-3/4 |
9/16 |
3/4 |
.094 |
7/16 |
18mm |
12B |
| 9990034 |
1-1/4 x 12 |
12 |
14-1/2 |
7/8 |
1-1/4 |
.156 |
3/4 |
24mm |
12 |
| 9990040 |
3/4 x 10 |
10 |
11-1/2 |
9/16 |
3/4 |
.094 |
7/16 |
12mm |
24 |
| 9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
24 |
| 999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
24 |
| 999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| 999F007 |
5/8 x 6 fixed shank |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
24 |
| Adapters |
| 314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
na |
24 |
| 314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
na |
24 |
| 2451800 |
B-3/4 to 1 # |
na |
na |
18mm |
24mm |
na |
na |
na |
12 |
| 311.812.120 |
X-1/2 Verti-Drill |
na |
na |
1/2 |
na |
na |
na |
12mm |
24 |
| 311.819.120 |
Y-3/4 Verti-Drill |
na |
na |
3/4 |
na |
na |
na |
18mm |
12 |
| Verti-Drills |
| 311.812.230 |
1/2 x 10 Drill |
10 |
10.5 |
na |
1/2 |
na |
na |
12mm |
24X |
| 311.819.230 |
3/4 x 10 Drill |
10 |
10.5 |
na |
3/4 |
na |
na |
18mm |
12Y&B |
|
|
|
|
|
|
|
|
|
|
| Part # |
Description |
Notes |
Qty. |
| 9500100 |
Hydraulic Wheel Kit
|
Converts from 3-pt mount to trailed unit with hydraulic lift frame & tires |
1 |
| 211.751.008 |
Turf Hold Down Kit |
Aligns with 12mm tineholder holes |
1 |
| 211.751.006 |
Turf Hold Down Kit |
Aligns with 24mm tineholder holes |
1 |
|
9500080
|
Core Collector
|
Pulls core to end of pass |
1 |
| 211.730.010 |
Windrow Kit |
Funnels cores into a straight line behind machine |
1 |
| 211.751.010 |
Pencil Tine Block Kit |
Holds eight 8mm shank tines per head |
1 kit |
| 314.425.186 |
Quad Tine Block |
Holds eight 3/8" shank tines per head |
6 |
| 314.425.184 |
Dimple Tine Block |
Holds eight 12mm dimple tines or eight 12mm shank quad or cross tines |
6 |
| 211.752.004 |
Auxiliary Spring Kit |
Additional spring for added tension |
6 |
| 468.102.230 |
Tine Head Reinforcing Plate |
Hardened plate bolts to bottom of tine head for additional strength |
6 |
|
|
|
