|
Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7117
The high-speed Verti-Drain 71 Series is a winner for both golf courses and sportsfields. The 71 Series Verti-Drains are the fastest deep-tine aerators, running at speeds of up
to 2.75 mph.
Like all Verti-Drains, the 71 Series has the single lever adjustment parallelogram "heave" action. This lever is used to obtain the perfect tine angle for either solid or hollow tines.
The 7117 can drive 6" tines, solid or hollow, at a faster rate than any other aerator, which makes it the perfect machine for high speed runs down sportsfields, fairways and for even shorter work on the greens.
Download brochure
click on the table name for more information
| Model |
| Working width |
68” (1.70 mtr) |
| Working depth |
Up to 6” (150 mm)
|
|
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄8” (55 mm)
Spacing 3 1⁄2” (90 mm)
Spacing 5” (125 mm)
|
-
Up to 1.25 mph (2.0 kmh/)
Up to 2.0 mph (3.2 km/h)
Up to 2.7 mph (4.3 km/h)
|
| PTO speed |
Up to 500 rpm in 1st and 2nd gear, 400 rpm in 3rd. |
| Weight |
1,265 lbs (575 Kg)) |
| Hole spacing side-to-side |
2-1⁄8” (55 mm) |
| Hole spacing in driving direction |
1” - 5” (25 mm – 125 mm) |
| Recommended tractor size |
28HP with lift capacity of minimum 1,550 lbs (700 Kg ))
|
|
Capacity (maximum)
Spacing 2 1/8” (55 mm)
Spacing 3 1/2” (90 mm)
Spacing 5” (125 mm)
|
-
Up to 35,583 sq ft (3,307 sq m) /hour
Up to 58,226 sq ft (5,411 sq m) /hour
Up to 80,870 sq ft (7,516 sq m) /hour
|
| Shipping dimensions |
76” x 30” x 42” (1900 x 750 x 1050 mm))
|
| Maximum tine size |
Solid 1⁄2” x 6” (12 x 150 mm)
Hollow 3⁄4” x 6” (19 x 150 mm)
|
| Three point linkage |
3- point CAT 1 |
| Transmission oil |
Life time grease EP 00 |
| Lubrication grease |
EP 2 |
| Standard items |
Set solid tines to 1⁄2” x 6” (12mm x 150mm)
Front and rear roller with scrapers
3- shuttle gearbox
|
|
|
| FEATURE |
BENEFIT |
| Up to 2.75 mph |
Fastest rate ever
|
| Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring |
| Sealed bearings not bushings |
Long maintenance free life |
|
Simple tine design
|
Easy to change and cheap to replace
|
| Solid and hollow tines |
Versatile |
| 68" working width |
Quicker to finish |
click on the table name for more information
| Model |
| Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
| Solid Tines |
| 311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
30 |
| 311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
30M/50* |
| 311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
30N |
| 311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
50* |
| Coring Tines |
| 311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
30M/50* |
| 311.210.127 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
30M/50* |
| 9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
30 |
| 999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
30 |
| 999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
30 |
| Adapters |
| 314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
na |
24 |
| 314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
na |
24 |
|
|
|
|
|
|
|
|
|
|
| Part # |
Description |
Notes |
Qty. |
| 211.700.016 |
Pencil Tine Block
|
Holds five 8mm shank tines, bolts to bottom of time head |
10 |
| 314.425.180 |
Dimple Seeder Tine Block |
Holds five 12mm dimple tines |
10 |
| 9300080 |
Core Collector 7117 |
Pulls cores to end of pass, releasing them when raised |
1 |
|
211.711.004
|
Turf Hold Down Kit 7117
|
For up to and including 13/16" OD tines |
1 |
| 318.302.150 |
Core Deflector Plate |
Deflects cores out rear of machine |
10 |
| 211.731.010 |
Windrow Kit |
Funnels cores into a straight line behind machine |
10 |
|
|
|
