Aeration
|
Compaction Relief (Verti-Drain)
Click for larger image and other views
|
Verti-drain 7110
The Verti-Drain 7110 is a fast Verti-Drain with a working width of 40" (1.0m), penetrating up to 6" (150 mm) deep. The tines can be adjusted to the vertical position for hollow coring, or to the "kick" position for solid tine use. It is a simplified Verti-Drain model, containing a one-speed gearbox, and considerably less weight (approx 725 lbs/330kgs) allowing for use of a 13-15 hp tractor. The 7110 is supplied without a rear roller.
Download brochure
click on the table name for more information
Model |
Working width |
40” (1.0 m) |
Weight |
725 lbs (330 kgs) |
Working depth |
6” (150 mm) |
Hole spacing side-to-side |
2” (55 mm) |
Hole spacing forward @ 500rpm Spacing 2 1⁄8” (55 mm) Spacing 3 1⁄2” (90 mm)
Spacing 5” (125 mm)
|
1.25 mph (2 kmh)
2 mph (3.2 kmh)
2.7mph (4.3 kmh)
|
Recommended tractor size |
13hp |
Capacity (maximum)
Spacing 2 1/8” (55 mm)
Spacing 3 1/2” (90 mm)
Spacing 5” (125 mm)
|
21,950 sq ft/h (2,040 sq m/h)
34,755 sq ft/h (3,230 sq m/h)
47,129 sq ft/h (4,380 sq m/h)
|
Options |
Solid tines from 3/16” x 5” (5mm x 125mm)
to 1/2” x 6” (12mm x150mm)
Hollow tines from 3/8” x 5” (10mm x 125mm)
to 3/4” x 6” (18mm x 150mm)
Turf hold down fingers
Windrow kit
Rear Roller
|
FEATURE |
BENEFIT |
fast working speed |
higher productivity
|
requires only 13hp |
can be used with smaller tractors |
weighs only 725 lbs (330 kg) |
less lift capacity needed |
one speed gear box
|
simple to use
|
six inch working depth |
deeper than the competition |
variety of tines |
more versatile machine |
click on the table name for more information
Part # |
Description |
Notes |
Qty. |
211.700.016 |
Pencil Tine Block
|
Holds five 8mm shank tines, bolts to bottom of time head |
10 |
314.425.180 |
Dimple Seeder Tine Block |
Holds five 12mm dimple tines |
10 |
9300080 |
Core Collector 7117 |
Pulls cores to end of pass, releasing them when raised |
1 |
211.711.004
|
Turf Hold Down Kit 7117
|
For up to and including 13/16" OD tines |
1 |
318.302.150 |
Core Deflector Plate |
Deflects cores out rear of machine |
10 |
211.731.010 |
Windrow Kit |
Funnels cores into a straight line behind machine |
10 |
Model |
Part # |
Description |
Depth |
Total |
ID |
OD |
Wall |
Core |
Mount |
Qty. |
Solid Tines |
311.112.150 |
1/2 x 6 |
6 |
8 |
na |
12mm |
na |
na |
12mm |
30 |
311.108.150 |
5/16 x 6 |
6 |
8 |
na |
8mm |
na |
na |
8mm |
30M/50* |
311.105.125 |
3/16 x 5 |
5 |
5-3/4 |
na |
5mm |
na |
na |
5mm |
30N |
311.112.075 |
1/2 x 3/4 Dimple |
3/4 |
4 |
na |
12mm |
na |
na |
12mm |
50* |
Coring Tines |
311.210.080 |
3/8 x 3-1/4 |
3-1/4 |
4-1/4 |
5/1 |
3/8 |
.045 |
1/4 |
8mm |
30M/50* |
311.210.127 |
3/8 x 5 |
5 |
6 |
5/16 |
3/8 |
.047 |
1/4 |
8mm |
30M/50* |
9990076 |
1 x 6 |
6 |
7 |
3/4 |
1 |
.125 |
5/8 |
12mm |
30 |
999F003 |
13/16 x 6 |
6 |
7-3/8 |
9/16 |
13/16 |
.105 |
1/2 |
12mm |
30 |
999F005 |
5/8 x 6 |
6 |
7 |
1/2 |
5/8 |
.062 |
3/8 |
12mm |
30 |
Adapters |
314.208.043 |
M-8mm to 12mm |
na |
na |
8mm |
12mm |
na |
na |
na |
24 |
314.205.043 |
N-5mm to 12mm |
na |
na |
5mm |
12mm |
na |
na |
na |
24 |
|
|
|
|
|
|
|
|
|
|
|
|
|