Main Aeration Top dressing Overseeding Cleaning & General
Maintenance
Cultivation &
Regeneration
Artificial Turf
Maintenance
Aeration
Compaction Relief (Verti-Drain)
Click for larger image and other views
1

Verti-drain 7113

The high-speed Verti-Drain 71 Series is a winner for both golf courses and sportsfields. The 71 Series Verti-Drains are the fastest deep-tine aerators, running at speeds of up to 2.75 mph.

Improvements include single-point arm adjustment, a stronger tine support system and fewer moving parts. The 7113 can drive 6" (150mm) tines, solid or hollow, at a faster rate than any other aerator, which makes it the perfect machine for high speed runs down sportsfields, fairways and for even shorter work on the greens.

Download brochure

click on the table name for more information
Model

Verti-Drain 7113

Working width 54” (1.34 m)
Working depth Up to 6” (150 mm)

Tractor speed@500 rev’s at PTO
Spacing 2 1⁄8” (65 mm)
Spacing 3 1⁄2” (90 mm)
Spacing 5” (125mm)


Up to 1.25 mph (2.0 km/h)
Up to 2.0 mph (3.2 km/h)
Up to 2.7 mph (4.3 km/h)

PTO speed Up to 500 rpm
Weight 1,145 lbs (520 kg)
Hole spacing side-to-side 2 1⁄8” (55 mm)
Hole spacing in driving direction 1” - 5” (25 mm – 125 mm )
Recommended tractor size

23 hp, min lift cap - 1,450 lbs (650kg)

Capacity (maximum)
Spacing 2 1/8” (65 mm)
Spacing 3 1/2” (90 mm)
Spacing 5” (125mm)

-
28,514 sq ft (2,650 sq m)/hour
45,192 sq ft (4,200 sq m)/hour
61,224 sq ft (5,690 sq m)/hour

Three point linkage 3- point  CAT 1
Transmission oil Life time grease EP 00
Lubrication grease EP 2
FEATURE BENEFIT
Up to 2.7 mph (4.3 km/h)

Fastest rate ever

Unique adjustable parallelogram forced heave Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
Sealed bearings not bushings Long maintenance free life

Simple tine design

Easy to change and cheap to replace

Solid and hollow tines Versatile
54" (1.34m) working width Quicker to finish
click on the table name for more information
Part # Description Notes Qty.
211.700.016

Pencil Tine Block

Holds five 8mm shank tines, bolts to bottom of time head 10
314.425.180 Dimple Seeder Tine Block Holds five 12mm dimple tines 10
9300080 Core Collector 7117 Pulls cores to end of pass, releasing them when raised 1

211.711.004

Turf Hold Down Kit 7117

For up to and including 13/16" OD tines 1
318.302.150 Core Deflector Plate Deflects cores out rear of machine 10
211.731.010 Windrow Kit Funnels cores into a straight line behind machine 10
Model

Verti-Drain 7113

Part # Description Depth Total ID OD Wall Core Mount Qty.
Solid Tines
311.112.150 1/2 x 6 6 8 na 12mm na na 12mm 30
311.108.150 5/16 x 6 6 8 na 8mm na na 8mm 30M/50*
311.105.125 3/16 x 5 5 5-3/4 na 5mm na na 5mm 30N
311.112.075 1/2 x 3/4 Dimple 3/4 4 na 12mm na na 12mm 50*
Coring Tines
311.210.080 3/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 30M/50*
311.210.127 3/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 30M/50*
9990076 1 x 6 6 7 3/4 1 .125 5/8 12mm 30
999F003 13/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm 30
999F005 5/8 x 6 6 7 1/2 5/8 .062 3/8 12mm 30
Adapters
314.208.043 M-8mm to 12mm na na 8mm 12mm na na na 24
314.205.043 N-5mm to 12mm na na 5mm 12mm na na na 24
(c) 2010, Redexim. Design by "DiArt Studio"